AXIOMTEK IPC962-511-FL Series, Руководство пользователя

Страница: 91 / 104

IPC962/IPC964 Series U
ser’s Manual
Watchdog Timer 83
APPENDIX A
WATCHDOG TIMER
A.1 About Watchdog Timer
Software stability is major issue in most application. Some embedded systems are not watched
by operator for 24 hours. It is usually too slow to wait for someone to reboot when computer
hangs. The systems need to be able to reset automatically when things go wrong. The
watchdog timer gives us solution.
The watchdog timer is a counter that triggers a system reset when it counts down to zero from
a preset value. The software starts counter with an initial value and must reset it periodically. If
the counter ever reaches zero which means the software has crashed, the system will reboot.
A.2 How to Use Watchdog Timer
The I/O port base addresses of watchdog timer are 2E (hex) and 2F (hex). The 2E (hex) and
2F (hex) are address and data port respectively.
Assume that program A is put in a loop that must execute at least once every 10ms. Initialize
watchdog timer with a value bigger than 10ms. If the software has no problems; watchdog timer
will never expire because software will always restart the counter before it reaches zero.