AXIOMTEK IPC960-525 Series Скачать руководство пользователя страница 56

Страница: 56 / 124

IPC960/IPC962/IPC964-525 Series U

ser’s Manual

Hardware Installation

Step 4

Install the SO-DIMM (small outline dual in-line memory module) into the socket and
push it firmly down until it is fully seated. The socket latches are clipped onto the
edges of the memory module.



Step 5

After installing the memory modules, close the heatsink cover back to the chassis
and fasten all screws.

2.4 Installing the Hard Disk Drive

The IPC960-525/IPC962-525/IPC964-525 Series offers a convenient drive bay module for
users to install HDD/SSD. The system offers users two

2.5” Hard Disk Drives for installation.

Please follow the steps to install:

Step 1

Turn off the system.

Step 2

Disconnect the power connector.

Step 3

Unscrew the two screws and remove the bracket from the HDD tray.

Step 4

Open the HDD tray.



Содержание IPC960-525 Series





























































































































Результаты поиска

Содержание IPC960-525 Series

Отзывы:

Похожие инструкции для IPC960-525 Series

Бренды по названию

Популярные бренды

AXIOMTEK IPC960-525 Series, Руководство пользователя

Результаты поиска

Содержание IPC960-525 Series

Отзывы:

Похожие инструкции для IPC960-525 Series

Бренды по названию

Популярные бренды