background image

 

 

 

iii 

Safety Precautions 

Before getting started, please read the following important safety precautions. 

1. 

The  GOT815L-511  does  not  come  equipped  with  an  operating  system.  An 
operating  system  must  be  loaded  first  before  installing  any  software  into  the 
computer. 

2. 

Be  sure  to  ground  yourself  to  prevent  static  char ge  when  installing  the  internal 
components. Use a grounding wrist strap and place all electronic components in 
any  static-shielded  devices.  Most  electronic  components  are  sensitive  to  static 
electrical charge. 

3. 

Disconnect  the  power  cord  from  the  GOT815L-511  before  any  installation.  Be 
sure  both  the  system  and  external  devices  are  turned  OFF.  A  sudden  surge  of 
power could ruin  sensitive  components   that  the  GOT815L-511  must  be  properly 
grounded. 

4. 

The  brightness  of  the  flat  panel  display  will  be  getting  weaker  a s  a  result  of 
frequent  usage.  However,  the  operating  period  varies  depending  on  the 
application environment. 

5. 

Turn  OFF  the  system  power  before  cleaning.  Clean  the  system  using  a  cloth 
only.  Do  not  spray  any  liquid  cleaner  directly  onto  the  screen.  The  GOT815L-
511  may  come  with  a  touchscreen.  Although  the  touchscreen  is  chemical 
resistant,  it  is  recommended  that  you  spray  the  liquid  cleaner  on  a  cloth  first 
before  wiping  the  screen.  In  case  your  system  comes  without  the  touchscreen, 
you must follow the same procedure and not spray any cleaner on the flat panel 
directly. 

6. 

Avoid  using  sharp  objects  to  operate  the  touchscreen.  Scratches  on  the 
touchscreen may cause malfunction or internal failure to the touchscreen.  

7. 

The flat panel display is not susceptible to sho ck or vibration. W hen assembling 
the GOT815L-511, make sure it is securely installed.  

8. 

Do not open the system

s back cover. If opening the cover for maintenance is a 

must,  only  a  trained  technician  is  allowed  to  do  so.  Integrated  circuits  on 
computer  boards  are  sensitive  to  static  electricity.  To  avoid  damaging  chips 
from electrostatic discharge, observe the following precautions:  

  Before  handling  a  board  or  integrated  circuit,  touch  an  unpainted  portion  of 

the  system  unit  chassis  for  a  few  seconds.  This  will   help  to  discharge  any 
static electricity on your body. 

  When  handling  boards  and  components,  wear  a  wrist-grounding  strap,  available 

from most electronic component stores. 

Trademarks Acknowledgments 

Axiomtek  is  a  trademark  of  Axiomtek  Co.,  Ltd.  IBM,  PC/AT,  PS/2,  VGA  are 
trademarks of International Business Machines Corporation. 

Intel

®

 and Core

 are registered trademarks of Intel Corporation.  

MS-DOS, Microsoft C and Quick  BASIC are trademarks of Microsoft Corporation.  

VIA is a trademark of VIA Technologies, Inc. 

SST is a trademark of Silicon Storage Technology, Inc.  

UMC  is  a  trademark  of  United  Microelectronics  Corporation. Other  brand  names  and 
trademarks are the properties and registered brands of their respective owners . 

Содержание GOT815L-511











































Отзывы: