AXIOMTEK GOT812LR-832, Руководство пользователя

Страница: 36 / 40

GOT812LR-832 U
ser’s Manual
Drivers Installation 32
4.2 Touch Screen
The GOT812 uses the 5-wire analog resistive. There are the specification and dri ver
installation which are listed below.
 Specification
Touch Screen
5-wire Analog Resistive type
Touch Screen Controller PenMount 6000 USB Touch Screen Controller IC
Communications
USB interface
Baud Rate 19200 baud rate fixed
Resolution 1024 x 1024 (10 bit A/D converter inside)
Power Input 5V
Power Consumption Active: 24.6mA / Idle Mode: 13.4mA
 Driver Installation- Windows 7
The GOT3126T-832 provides a touch screen driver that users can install it under the
operating system Windows 7. To facilitate installation of the touch screen driver, you should
read the instructions in this chapter carefully before you attempt installation.
Step 1 Insert Driver CD and follow the path to select the
“\Drivers\Step 5 - Touch”.
Step 2 Follow the installing procedure and press OK.
Step 3
Click Start menu and select “PenMount Utilities”; and then, a “PenMount
Control Panel” pops out.