AXIOMTEK GOT3187WL-834, Руководство пользователя

Страница: 15 / 47

GOT3187WL-834
User’s Manual
Hardware and Installation 11
2.2 Jumper and Switch Setting
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to GOT3187WL-834, please make sure all of the jumpers and switch
are in factory default position. Below you can find a summary table and onboard default
settings.
Jumper Description Setting
JP6
PCIe / mSATA setting
Default: PCIe
1-2 close
JP7
Auto Power On
Default: Disable
2-3 close
JP8
Restore BIOS Optimal Defaults (Clear CMOS)
Default: Normal Operation
1-2 close
2.2.1 PCIe / mSATA setting (JP6)
For CN8, switches mSATA or PCIe setting.
2.2.2 Auto Power On (JP7)
If JP7 is enabled for power input, the system will be automatically power on without pressing
soft power button. If JP7 is disabled for power input, it is necessary to manually press soft
power button to power on the system.
Function Setting
PCIe (Default) 1-2 close
mSATA 2-3 close
Function Setting
Enable auto power on (Default) 1-2 close
Disable auto power on 2-3 close