AXIOMTEK EP850 Series, Руководство пользователя

Страница: 29 / 68

EP850 All-In-One EPIC Board User’s Manual
Jumpers and Connectors
23
2.4.12 VGA Connector (CN14)
CN14 is a standard 15-pin pin DB15 connector commonly used for the
CRT VGA display.
Pin Signal Pin Signal Pin Signal
1 Red 2 Green 3 Blue
4 N/A 5 GND 6 AGND
7 AGND 8 AGND 9 N/A
10 GND 11 N/A 12 DDC DAT
13 Horizontal Sync 14 Vertical Sync 15 DDC CLK
2.4.13 Ethernet Connectors (LAN1, LAN2)
The RJ-45 connector is for Ethernet. To connect the board to 100-
Base-T or 1000-Base-T hub, just plug one end of the cable into the
LAN1 or LAN2 , and connect the other end (phone jack) to a 100-Base-
T hub or 1000-Base-T
hub.
Pin Signal
1 Tx+ (Data transmission positive)
2 Tx- (Data transmission negative)
3 Rx+(Data reception positive)
4 RJ-1(For 100 base T-Only)
5 RJ-1(For 100 base T-Only)
6 Rx- (Data reception negative)
7 RJ-1(For 100 base T-Only)
8 RJ-1(For 100 base T-Only)
A Active LED
B 100/1000 LAN LED