AXIOMTEK EP600 Series, Руководство пользователя, Страница: 62 / 76

EP600 Pentium
®
M All-in-One Capa Board User’s Manual
54
Award BIOS Utility
z
Standby Mode
After the selected period of system inactivity (1 minute to 1 hour),
the fixed disk drive and the video shut off while all other devices
still operate at full speed. The default value is
“ Disabled ”
.
Disabled System will never enter STANDBY mode
1/2/4/6/8/10/2
0/30/40 Min/1
Hr
Defines the continuous idle time before the
system entering STANDBY mode.
If any item defined in (J) is enabled & active,
STANDBY timer will be reloaded
z
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour),
all devices except the CPU shut off. The default value is
“
Disabled
”
.
Disabled System will never enter SUSPEND mode
1/2/4/6/8/10/2
0/30/40 Min/1
Hr
Defines the continuous idle time before the
system entering SUSPEND mode.
If any item defined in (J) is enabled & active,
SUSPEND timer will be reloaded
z
HDD Power Down
After the selected period of drive inactivity (1 to 15 minutes), the
hard disk drive powers down while all other devices remain active.
The default value is
“
Disabled
”
.
Disabled HDD’s motor will not power OFF.
1/2/3/4/5/6/7/
8/9/10/11/12/1
3/14/15 Min
Defines the continuous HDD idle time before
the HDD enters power saving mode (motor
OFF)
z
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only
part of the time. You may select the percent of time that the clock
runs. The default value is
“ 62.5% ”
.
z
VGA Active Monitor
When Enabled, any video activity restarts the global timer for
Standby mode. The default value is
“
Enabled
”
.