AXIOMTEK EP100, Руководство пользователя

Страница: 66 / 68

EP100 AMD Embedded G-Series Processor EPIC Board with LVDS
60 Digital I/O
;Programming DIO as in/out.
mov
dx,2Eh
mov al,0E0h
out dx,al
mov dx,2Fh
mov al,Nh ;If N=07h, DIO is programmed as 3 inputs
out dx,al ;and 5 outputs (see below Note1 )
Digital Input:
;Read digital input data.
mov
dx,2Eh
mov al,0E1h
out dx,al
mov dx,2Fh ;If N=07h, bit0~2 represent DIO0~2,
in dx, al ;bit0~2 are DIO pin 0~2 state (1 High, 0 Low)
;(see below
Note2
)
Digital Output:
; Set DIO digital output pins value.
mov
dx,2Eh
mov al,0E1h
out dx,al
mov dx,2Fh
mov al,M ;If N=07h, bit3~7 represent DIO3~7,
out dx,al ;set output value M
;bit3~7 are DIO pin 3~7 state (1 High, 0 Low)
;if M=FFh, all DIO pins are high
;(see below
Note3
)
Note1:
The N has 8 bits. Every bit
’s value is either 1 or 0.
" 1" means that the bit is programmed to input.
" 0" means that the bit is programmed to output.
Ex:
1.
N =00h=00000000b
DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0
Output Output Output Output Output Output Output Output
2. N =02h=000000 1 0b
DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0
Output Output Output Output Output Output Input Output
3. N =07h=00000 111 b
DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0
Output Output Output Output Output Input Input Input
4. N =F2h= 1111 00 1 0b
DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0
Input Input Input Input Output Output Input Output
Note2:
If N =07h
DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0
Output Output Output Output Output Input Input Input