©Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in Taiwan
9416K800030E
2
I/O Outlets
The following figures show I/O outlets on front of the eBOX800-900-FL.
Top View
Bottom View
©
Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in Taiwan
9416K800030E
3
Installation of LTE Mini PCIe Module (half-size)
Step 1 Turn off the system and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom
as red marked and loosen six screws, then remove the bottom
cover. And locate the PCI Express mini card slot on the board.
Step 3 Holding the PCI Express mini card at a 45-degree angle up
from horizontal, slowly insert the golden fingers into the PCI
Express slot until it is fully inserted in. And secure the PCI
Express mini card to the carrier by tightening up the one
M2*5L screw to the marked position.
Step 4 Find the SMA cables from the adhesive backed cord clip
attached at the chassis as picture below.
Step 5
Connect the SMA cables to I-PEX connector of LTE Module
and install LTE Antennas.
