AXIOMTEK eBOX671A Series, Руководство пользователя

Страница: 41 / 81

eBOX671A Series u
ser’s Manual
BIOS Setup Utility 33
SECTION 4
BIOS SETUP UTILITY
This section provides users with detailed description s in terms of how to set up basic
system configurations through the BIOS setup utility.
4.1 Starting
To enter the setup screens, follow the steps below:
1.
Turn on the computer and press the <Del> key immediately.
2. After press the <Del> key, the main BIOS setup menu displays.
Users
can access to other
setup screens, such as the Advanced and Chipset menus, from the main BIOS setup
menu.
It is strongly recommended that
users
should avoid changing the c
hipset’s defaults. Both AMI
and system manufacturer have carefully set up these defaults that provide the best
performance and reliability.
4.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS
setup utility hot keys can be used at any time during the setup navigation process. These keys
include <F1>, <F2>, <Enter>, <ESC>, <Arrow> keys, and so on.
【
Note
】
:
Some of the navigation keys differ from one screen to another.
Hot Keys Descriptions
→
Left/Right The Left and Right <Arrow> keys allow users to select a setup screen.

Up/Down
The Up and Down <Arrow> keys allow users to select a setup screen or sub-
screen.
+
−
Plus/Minus
The Plus and Minus <Arrow> keys allow users to change the field value of
a particular setup item.
Tab The <Tab> key allows users to select setup fields.
F1 The <F1> key allows users to display the General Help screen.
F2 The <F2> key allows users to Load Previous Values.
F3 The <F3> key allows users to Load Optimized Defaults.
F4
The <F4> key allows users to save any changes they made and exit the
Setup. Press the <F4> key to save any changes.
Esc
The <Esc> key allows users to discard any changes they made and exit the
Setup. Press the <Esc> key to exit the setup without saving any changes.
Enter
The <Enter> key allows users to display or change the setup option listed
for a particular setup item. The <Enter> key can also allow users to display
the setup sub- screens.