©Copyright 2019 Axiomtek Co., Ltd.
Version A1 April 2019
Printed in Taiwan
9416K671030E
2
I/O Outlets
The following figures show you I/O outlets on front and rear panels of the
eBOX671-517-FL Series.
Front View
Rear View
©
Copyright 2019 Axiomtek Co., Ltd.
Version A1 April 2019
Printed in Taiwan
9416K671030E
3
Installation of Hard Disk Drive
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the bottom,
and then loosen all screws.
Step 3 Open the bottom cover.
Step 4 Locate SSD/HDD within the red line as marked.
Please notice the direction of connector for HDD.
Step 5 Assemble the SSD/HDD with the four HDD mounting screws.
Make sure the PCB side of the SSD/HDD will be facing the
bottom cover and connected the SATA power cable.
Step 6 Put the bottom cover and fasten all the screws back onto the
system.
