©
Copyright 2015 Axiomtek Co., Ltd.
Version
A2
March
2015
Printed
in
Taiwan
9416K660
020E
2
III. I/O
Outlets
The following figures show you I/O outlets on front and rear panels of the
eBOX660-872-FL Series.
Front View
Rear View
©
Copyright 2015 Axiomtek Co., Ltd.
Version A2 March 2015
Printed in Taiwan
9416K660
020E
3
IV. Installing the HDD
Step 1
Turn off the system, and unplug the power cable.
Step 2
Turn the system to the side with HDD Bracket. Locale the 2.5” HDD
Bracket, loose two thumb nail screws, and then pull out the HDD
Bracket smoothly
Step 3
Assemble the HDD bracket together with the 2.5” SATA device
Step 4
Slide HDD/SSD bracket module into position to connect SATA
signal and power to SATA device, and then fasten screws of HDD
bracket
V. Installing the CFast Card
Step 1
Turn off the system, unplug the power cable, turn the system to the
side with CFast cover.
Step 2
Loosen screws to remove the CFast cover, slide CFast card into
CFast slot with caution.
Step 3
Close the cover to the chassis, and fasten all screws.
