©Copyright 2016 Axiomtek Co., Ltd.
Version A1 April 2016
Printed in Taiwan
9416K625020E
2
I/O Outlets
The following figures show you I/O outlets on front and rear panels of the
eBOX625-853-FL Series.
Front View
Rear View
©Copyright 2016 Axiomtek Co., Ltd.
Version A1 April 2016
Printed in Taiwan
9416K625020E
3
Installing the Hard Disk
Step 1
Turn the system upside down to locate screws at the bottom,
loosen screws.
Step 2
Remove the bottom cover and then prepare your 2.5” HDD/SSD to
assemble with your bottom cover.
Step 3
Please refer to the below photo and you can see some marks on
the surface of bottom cover, assemble your HDD on bottom cover
and notice HDD’s connector position.
Step 4
Assembly the HDD together with the SATA HDD then fasten four
screws of bottom cover. Please note you should check HDD
connector’s position.
Step 5
Connect SATA cable and power cable to SATA HDD.
Step 6
Please fastens screws of bottom cover to complete installation.
