AX92325 2/4-port PCI Express 1GigE PoE Card with M12 X-coded connector
Connectors & Jumper
5
Section 2
Connectors & Jumper
2.1
Connectors & Jumper
This section describes the pin definitions of all connectors and jumper settings. Connectors
connect the board with other parts of the system. Loose or improper connection might cause
malfunctions. Make sure all connectors are properly and firmly connected.
The following table lists the function of each connector on the AX92325.
Connectors & Jumper
Label
ATX1
2.1.1
ATX2
2.1.2
LAN1~4
2.1.3
JP1
2.1.4
2.1.1
External Voltage Input (ATX1)
The power connector is used for the PoE function when the total power of the powered
device is over 20 watts. The external power ATX1 is able to support max. 120 watts of
PoE output.
Pin
Signal
1
+12V / +24V
2
+12V / +24V
3
+12V / +24V
4
Ground (GND)
5
Ground (GND)
6
Ground (GND)
Note:
* 24V power is for Axiomtek’s products only.
* 12V power is for 6-pin ATX power supply.
