AXIOMTEK AX92320, Руководство пользователя

Страница: 19 / 20

AX92320 4-port Gigabit 802.3at PCI Express PoE Card
Board ID Mapping 15
APPENDIX A
Board ID Mapping
This section will guide you to solve the common issues when running our application.
1. Board ID Collision
Cause:
The board ID of the PoE card is mapping to physical SMBus address. If the duplicate
SMBus addresses are in the same bus, this will cause communication collision.
Situation:
1.
“AXPoE Manager” pops up the “Cannot find any AXPoE device on this system”
message.
2. The number of devices is not as expected in
“AXPoE Manager”
Solution:
1. Please check that the PoE card was installed properly on the system.
2. If the step1 is fine, these may be caused by board ID collision, please follow the
step as below to fix it.
3. Run the
“AXPoEDiagnosis.exe” tool to show the available board ID in the current
system, and please change the board ID to these available board ID.