• Do not touch the charging connector when the test lead is connected.
Caution!
To avoid possible damage to meter or to equipment under test:
• Disconnect the power and discharge all high-voltage capacitors before testing resistance or continuity.
• Use the proper jacks, function, and range for the measurement or sourcing application.
International Electrical Symbols
AC Current
DC Current
AC or DC
Safety rules
Earth ground
Fuse
Double Insulated
Low Battery
CAT II - CAT11 Overvoltage (Installation) Category11, Pollution Degree 2 per IEC61010 refers to the level
of Impulse Withstand Voltage protection provided. Typical locations include: Plug and the connecting
electric
equipments, home appliance, convenient, tools, domestic plug, plugs 10m distant from type 3 circuit or
20m distant from type 4 circuit.
3. Measuring Electrical Parameters
The proper sequence for taking measurements follows:
1. Plug the test lead into the appropriate jacks
2. Set the rotary function switch to the desired function
3. Touch the probes to the test points
4. View the results on the LCD display
4. Input Impedance
For the voltage measurement functions, measuring impedance is 10 MΩ. See “Specifications” for more
information.
