PREDICTION: EASE Focus 2
To aim correctly a complete system we suggests to use always the Aiming Software - EASE Focus 2:
The EASE Focus 2 Aiming Software is a 3D Acoustic Modelling Software that serves for the configuration
and modelling of Line Arrays and conventional speakers close to reality. It only considers the direct
field, created by the complex addition of the sound contributions of the individual loudspeakers or
array components.
The design of EASE Focus is targeted at the end user. It allows the easy and quick prediction of the array
performance in a given venue. The scientific base of EASE Focus stems from EASE, the professional
electro- and room acoustic simulation software developed by AFMG Technologies GmbH. It is based
on the EASE GLL loudspeaker data file required for its use:
AXIOM_AX Series_v2_3.GLL
, please note
that the version must be 2.3 or more. The GLL file contains the data that defines the Line Array with
regard to its possible configurations as well as to its geometrical and acoustical properties.
Download the EASE Focus 2 app from the AXIOM website at http://www.axiomproaudio.com/ clicking on downloads section of the product.
Use the menu option
Edit / Import System Definition File
to import the file
AXIOM_AX Series_v2_3.gll
from the installation Data folder, the
detailed instructions to use the program are located in the menu option
Help / User’s Guide
.
Note: Some windows system can require the
.NET Framework 4
that can be download from microsoft website at http://www.microsoft.com/en-
us/download/default.aspx.
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• This loudspeaker is designed exclusively for Professional audio applications. The product must be installed by qualified personal only.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideration all current National, Federal, State and Local
regulations. Please contact the manufacturer for further information.
• Proel do not accept any liability for damage caused to third parties due to improper installation, lack of maintenance, tampering or improper
use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay attention to the possible risk of crushing. Wear suitable protective clothing. Observe all instructions given on the rigging
components and the loudspeaker cabinets. When chain hoists are in operation ensure that there is nobody directly underneath or in the vicinity
of the load. Do not under any circumstances climb on the array.
AIMING and SUSPENDING INSTRUCTIONS (FLOWN SET UP)
Suspending the sub-woofers has different advantages and some inconvenient. One inconvenient is that it’s not possible to use the cardioid
configuration, while another one is that as the sub-woofers don’t couple with the ground and indoor usage can have different behaviours
depending on ceiling and walls. The advantages are that the space underneath the stage can be free from subs, the coupling between sub and
sat is better and, using a column of 4-6 sub boxes, the basses can be steered more deeply into the audience with a more uniform distribution of
the low frequencies.
The SW36XFP subwoofers can be suspended alone or at the top of a vertical array of AX2010P loudspeakers using the KPTSW36 fly bar. The
boxes are linked together in a column using a series of couplers integrated in the frame of each enclosure. Each system can be set properly both
acoustically and mechanically, using the aiming software.
Coupling the system in the front does not require any adjustment: using two locking pins, each loudspeaker box is fixed to the previous. The
slotted bar in the back is inserted in a U-shaped frame that features a series of numbered holes. Sliding the slotted bar in the U-shaped frame
of the next loudspeaker and inserting a locking pin in one of the numbered holes, it is possible to adjust the relative splay angle between two
adjacent loudspeakers in the array column.
KPTSW36
fly bar maximum capacity is 780 Kg (1719 lbs) with the 0° angle. It can support, with a safety factor of 10:1, up to:
• 16 AX2010P (flybar from 0 to 10°)
• 2 S 12 AX2010P (flybar from 0 to 10°)
• 6 S 4 AX2010P (flybar from 0 to 10°)
• 8 SW36XFP (flybar at 0°)
SUSPEND HOLES
SUSPEND HOLE
INDICATOR
AX2010 REAR BOX
PIN ATTACHMENT
SW36XF REAR BOX
PIN ATTACHMENT
FRONT BOX
PIN ATTACHMENT
FRONT BOX
PIN ATTACHMENT
STRAIGHT SHACKLE 16mm
(not supplied)
M10 FOOT FOR
STACKED INSTALLATION
(OPTIONAL)
IDENTIFICATION AND
DATA LABEL
KPTSW36 FLY BAR AND ACCESSORIES
REST PIN FOR
UNUSED ATTACHMENT
