PRESET
The SW115A has three factory presets already stored inside the CORE DSP, these preset are ready to use the sub in combination with AX2065A
vertical array loudspeaker or any other professional audio system:
STANDARD PRESET:
the response starts at 45Hz and the cutoff is at 100Hz with LR 24dB/oct., use this preset for almost any application at ground
stack and it must be used with the SW215AF set as flown (see FLOWN SET UP).
INFRASUB PRESET:
the response starts at 39Hz and the cutoff is at 60Hz with LR 24dB/oct., use this preset when a very deep bass response is
required, it must be used at ground stack only, alone or in combination with some other boxes set as STANDARD, absolutely do not use it in
combination of CARDIOD preset. NOTE: INFRA and STANDARD PRESET must NOT be used together in close units.
CARDIOD PRESET:
the response of this preset is the same of STANDARD preset but when combined together as described further the sub stack is
capable to cancel tha bass in the backwards, absolutely it must be used in combiantion of other two boxes and at ground stack.
AIMING and SUSPENDING INSTRUCTIONS (SW215AF only)
PREDICTION: EASE Focus 2
To aim correctly a complete system we suggests to use always the Aiming Software -
EASE Focus 2
:
The
EASE Focus 2 Aiming Software
is a 3D Acoustic Modelling Software that serves for the configuration
and modelling of Line Arrays and conventional speakers close to reality. It only considers the direct
field, created by the complex addition of the sound contributions of the individual loudspeakers or
array components.
The design of EASE Focus is targeted at the end user. It allows the easy and quick prediction of the array
performance in a given venue. The scientific base of EASE Focus stems from EASE, the professional
electro- and room acoustic simulation software developed by AFMG Technologies GmbH. It is based on
the EASE GLL loudspeaker data file required for its use:
AXIOM_AX Series_v2_0.GLL
, please note that the version must be 2.0 or more. The GLL
file contains the data that defines the Line Array with regard to its possible configurations as well as to its geometrical and acoustical properties.
For detailed explanation of how to use the software and how to obtain a correct aiming refer to EASE Focus documentation and other on-line
manuals (http://focus.afmg.eu/index.php/fc-software-en.html).
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• This loudspeaker is designed exclusively for Professional audio applications.
The product must be installed by qualified personal only
.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideration all current National, Federal, State and
Local regulations. Please contact the manufacturer for further information.
• Proel do not accept any liability for damage caused to third parties due to improper installation, lack of maintenance, tampering or
improper use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay attention to the possible risk of crushing. Wear suitable protective clothing. Observe all instructions given on the
rigging components and the loudspeaker cabinets. When chain hoists are in operation ensure that there is nobody directly underneath or
in the vicinity of the load. Do not under any circumstances climb on the array.
FLOWN SET UP (SW215AF only)
Suspending the sub-woofers has different advantages and some incovenient. One incovenient is that it’s not possible to use the cardioid
configuration, while another one is that as the sub-woofers don’t couple with the ground and indoor usage can have different behaviours
depending on ceiling and walls. The advantages are that the space underneath the stage can be free from subs, the coupling between sub and
sat is better and, using a column of 4-6 sub boxes, the basses can be steered more deeply into the audience with a more uniform distribution of
the low frequencies.
The SW215AF subwoofers can be suspended alone or at the top of a vertical array of AX2065A loudspeakers using the KPTSW215 fly bar. The
boxes are linked together in a column using a series of couplers integrated in the frame of each enclosure. Each system can be set properly both
acoustically and mechanically, using the aiming software.
Coupling the system in the front does not require any adjustment: using two locking pins, each loudspeaker box is fixed to the previous. The slotted
bar in the back is inserted in a U-shaped frame that features a series of numbered holes. Sliding the slotted bar in the U-shaped frame of the
next loudspeaker and inserting a locking pin in one of the numbered holes, it is possible to adjust the relative splay angle between two adjacent
+15
+10
+5
0
-5
-10
-15
-20
-25
-30
-35
20
50
100
200
500
1K
2K
5K
10K
20K
Hz
SW215A - PRESET RESPONSE
INFRA
STANDARD
