Axiom LFR1100, Руководство пользователя, Страница: 7 / 8

7
Connecting the
Loudspeakers
Turn your speakers around and look
at the back panel. You’ll see five pairs
of gold-plated 5-way binding posts,
to which you are going to connect the
speaker cables from your amplifier.
Each gold binding post is color-
coded - RED is POSITIVE, BLACK
is NEGATIVE. You will also see a
positive (+) sign beneath each RED
binding post, and a negative (-) sign
beneath each BLACK binding post.
It is important that the negative wires
from your amplifier go to the negative
inputs on your speaker and the
positive wires from your amplifier go
to the positive inputs on your speaker.
The five pairs of binding posts are
also labelled with the name of each
driver section, from top to bottom:
REAR TW, REAR MID, FRONT TW,
FRONT MID, FRONT WF. Connect
each of these pairs to the amplifier
output corresponding to the DSP
connection with the same name.
Leveling
To level your speaker simply rotate
the outside of each foot until they
reach the desired height.
For detailed instructions on dual
binding post inputs, please visit:
www.axiomaudio.com/dual-input-connections
Step 2
Leave washer down.
Step 1
Bare ends of
speaker wire.
Step 3
Insert bare end of wire
through exposed hole
on binding post. Ensure
positive wire from Amp is
in red connector.
Step 4
Tighten nuts with supplied
plastic wrench.
Step 1
Lift washer.
Step 2
Ensure positive wire from
Amp is in red connector.
Step 1
Tighten nuts with
supplied plastic wrench
Step 3
Insert banana plug .
Step 3
Tighten nuts with supplied
plastic wrench.
Spade Lug (1/4-inch spade)
Bare Wire
Banana Plug (3/4-inch spacing)
Step 2
Insert spade into slots in
binding post.
Ensure positive wire from
Amp is in red connector.