USER MANUAL
CX15A
ac ve stage monitor loudspeaker
KEY FEATURES
• High-Output Coaxial Stage Monitor
• 80° constant coverage
• Very compact size
• 96KHz / 40 bit
fl
oa ng point CORE processing with PRONET remote control
• Low-pro
fi
le design
• Digitally controlled Class D ampli
fi
er module with SMPS
INTRODUCTION
The CX15A is a coaxial stage monitor designed speci
fi
cally for live sound, even if the low-
pro
fi
le enclosure is suitable also for theater and television applica ons. The high-performance
coaxial transducer employed provides good sound balance and great intelligibility even at
very high power.
The high frequency range is reproduced by a low-distor on compression driver, equipped with
pure Titanium diaphragm. An edgewound aluminum ribbon voice coil and a copper sleeve
reduce distor on and increase the unit’s output. The special shape of the cone allows a precise
and controlled conical dispersion of 80°.
The 15” woofer employed in the reproduc on of the low frequency range is equipped with a
special interleaved sandwich 3” voice coil and an aluminum demodula on ring for minimum
distortion. A single powerful neodymium magnet guarantees high performance with a
consistent weight reduc on.
TECHNICAL SPECIFICATION
Acous
Ɵ
cal
Remote Controls
PRONET control so ware
System type
2-way processed coaxial ac ve enclosure
Network protocol
CANBUS
Low frequency transducer
One 15” (380mm), 3” (75mm) Interleaved
Voice Coil, 8 Ohm
Ampli
fi
er Type
Class D with Variable Switching Frequency
and SMPS
Output Power
2000 W
High frequency transducer
One 1.4” driver, 2.4” (60mm) edgewound
aluminium voice coil, tanium diaphragm,
8 Ohm
Mains Voltage Range (Vac)
230 V~ ±15% or 115 V~ ±15% 50/60 Hz
Mains Connector
PowerCon® (N NAC3MPB)
Consump on*
700 W (nominal) 1700 W (max)
Frequency response (±3 dB)
60 Hz – 18 kHz (Processed)
IN / OUT Connectors
Neutrik XLR-M / XLR-F
Horizontal Coverage Angle
80° (-6 dB)
IN / OUT Network Connectors
ETHERCON® (NE8FAV)
Ver cal Coverage Angle
80° (-6 dB)
Mechanical
Maximum Peak SPL @ 1m
131 dB
Width
520 mm (20.47”)
Electrical
Height
336 mm (13.22”)
Input Impedance
20 k
Ω
balanced
Depth
415 mm (16.33”)
Input Sensi vity
+4 dBu / 1.25 V
Monitor Taper Angle
45° or 55°
Signal Processing
CORE processing, 96kHz / 40bit
fl
oa ng
point SHARC DSP, 24 bit AD/DA converters
Construc on
15 mm, reinforced Phenolic Birch
Paint
High resistance, water based paint
Pole holder
1 x side, dual-angle
Direct access Controls
4 Presets: Normal Wedge, Coupled Unit, Low
Cut, User.
Network Termina on, GND Link
Net Weight
18.5 Kg (40.8 lbs.)
* Nominal consump
Ɵ
on is measured with pink noise with a crest factor of 12
dB, this can be considered a standard music program.
revision 2014-11-10
Содержание CX15A
Страница 7: ......
