C S M 1 2 D Q U I C K S T A R T G U I D E
A P R I L 7 , 2 0 0 5
2
GETTING STARTED
The CSM12D is a feature-rich module designed for use in an educational environment. The
Module supports both the MC9S12XDT512 and the MC9S12DT256 MCU’s. This document
will help the user get started using the module quickly. Although the module is designed for
use in conjunction with the MCU Project Board, the module may also be used as a stand-alone
development platform. The following procedure shows the user how to setup the module for
normal, stand-alone operation.
UNPACK
1. Open the shipping carton and remove the contents. Verify all Packing List items have been
received.
2. Inspect the CSM12D for any damage, which may have occurred during shipping. If
damage is found, refer to the Technical Information Center insert found in the product kit.
HARDWARE SETUP
1. To begin, place the CSM12D on a flat surface. Ensure sufficient space is available
around the module to work safely.
2.
Configure the option select headers on the CSM12D as shown below.
VX
VDD
PWR_SEL
USER
SW1
SW2
SW3-1
SW3-2
SW3-3
SW3-4
LED1
LED2
LED3
LED4
RV1
RZ1
RX
TX
COM
_
EN
