15
STACKED SYSTEM WITH KPAX8 POLE ADAPTER
WARNING!
• A maximum of 2 x AX800A can be installed on a pole using the KPAX8 pole adapter.
• The KPAX8 can be installed on a SW1800A sub-woofer (preferably in horizontal position) using the DHSS10M20
adjustable sub-Speaker ø 35mm spacer.
• The basement where the system is placed needs to be an horizontal plane.
• The splay angle of the first box attached to the KPAX8 must be less of 6°.
• The figure below shows the system configuration set up. Please note that the angles set up doesn’t correspond to the
silkscreen written on the back of the box, the figure below shows the real correspondence for a precise angles set up:
1°/2.5°
1.5°
2°/3.5°
3°/4.5°
4°/5.5°
5°
0°
6°
FULCRUM
HOLE
BLOCK
CAM
0°
1° - 6°
1.5° - 5.5°
USE IT FOR:
HALF
ANGLES
WHOLE
ANGLES
HORIZONTAL
NULL ANGLE
950 mm min.
1160mm max.
for the first box
set an angle
less than 6°
2 BOX
MAXIMUM
KPAX8
DHSS10M20
SW1800A
HINGE BAR
OF KPAX8
KPAX8 SPLAY ANGLES SET UP
LOCK THE PIN IN THE
HOLE TO OBTAIN THE
REQUIRED SPLAY
ANGLE.
FIRST BOX
