Stacked installa
Ɵ
on (KPTSW215 only)
WARNING!
• The ground where the KPTSW215 Fly bar serving as ground
support is placed needs to be absolutely stable and compact.
• Adjust the feet so to lie the bar perfectly horizontal.
• Always secure ground stacked setups against movement and
possible pping over.
• A maximum of 4 x AX2065 cabinets with the KPTSW215 Fly bar
serving as ground support are allowed to be set up as ground
stack.
In the stack configuration you have to use the three optional
BOARDACF01 feet and the
fl
y bar must be mounted upside down on
the ground.
Coupling system in the front do not require any adjustment: using two
locking pins each loudspeaker box is
fi
xed to the previous. The slo ed
bar in the back is inserted in a U-shaped frame which features a series
of numbered holes. Sliding the slo ed bar in the U-shaped frame of the
next loudspeaker and inser ng a locking pin in one of the numbered
holes, it is possible to adjust the rela ve splay angle between two
adjacent loudspeakers in the array column.
The op mal splay angles can be simulated using the EASE Focus 2
so ware.
System Processing basic instruc
Ɵ
on
The AX2065P system does not feature passive
fi
lters so it needs an
external processor to take care of the filtering, the time alignment
and the speaker protec on. For the system’s processing
PROEL PC260
digital loudspeaker processor
must be used, loaded with dedicated
presets for the correct system opera on, which o
ff
er the best star ng
point for se ng the me alignment, the gain and the equaliza on. For
detailed instruc ons about the use of PC260 refer to its user’s manual.
The presets can be download from the AXIOM web site in the AX2065P
download sec
Ɵ
on.
STANDARD PRESET (name: 1_ST01.pcf)
This PRESET is suitable for ver cal
fl
own arrays that may range from 4 to
8 boxes or for the centre region of a bigger
fl
own array. It can be used
also for stacked arrays.
NOTE:
in this preset the subwoofer SW215P is placed at the top of the
fl
own array, in case the sub is placed on ground an addi onal delay
me must be considered (read the PC260 OUT sec on further in this
manual).
LONG THROW PRESET (name: 1_LT01.pcf)
This PRESET can be used in arrays bigger than 6 or 8 boxes and loaded
in the top 1 or 2 boxes in order to obtain a more even distribu on of the
sound pressure, especially if they point very far away or to the upper
deck of a large theatre.
SINGLE/DOWN-FILL PRESET (name: 1_SD01.pcf)
This PRESET, which features a much smoother high frequency response,
can be loaded in the bo om boxes (usually 1 or 2 boxes) of a large
fl
own
array, in order to reach conveniently the audience close to the stage. It
can be used also for the conven onal system consis ng 1x SW215P at
ground and 2x AX2065P on pole.
This preset could be very useful also when the box is used just on its own
as a Front Fill element in the front of very large stages.
KPTSW215 STACKED ARRAY
max splay angle 10°
max splay angle 10°
max splay angle 10°
max splay angle 10°
System:
AXIOM AX Series
Company:
PROEL S.p.A.
Label:
AXIOM AX Series
Position:
X=0.00 m
Y=0.00 m
Z=4.00 m
Orientation:
Hor=0.0°
Ver=-5.1°
Weight:
164,30 kg
Setup:
SW215 SuspBar
Box Count:
5
Pinpoint Mode:
Best Pinpoint
Pinpoint Number:
7
Remaining Vertical Angle:
0.4°
Bottom Angle:
23,1 °
Above Ground:
2,31 m
Box Type
Gain
Rigging Angle
Aiming Angle
(Frame)
-5.1°
Box 1
SW215F
0.0 dB
0°
-5.1°
Box 2
AX2065 STD
0.0 dB
0°
-5.1°
Box 3
AX2065 STD
0.0 dB
1°
-6.1°
Box 4
AX2065 STD
0.0 dB
2°
-8.1°
Box 5
AX2065 STD
0.0 dB
10°
-18.1°
System:
AXIOM AX Series
Company:
PROEL S.p.A.
Label:
AXIOM AX Series
Position:
X=0.00 m
Y=0.00 m
Z=0.80 m
Orientation:
Hor=0.0°
Ver=0.0°
Weight:
96,00 kg
Setup:
AX2065 StackBar
Box Count:
4
Pinpoint Mode:
No Pinpoint
Box Type
Gain
Rigging Angle
Aiming Angle
Box 4
AX2065 STD
0.0 dB
0°
8.0°
Box 3
AX2065 STD
0.0 dB
1°
8.0°
Box 2
AX2065 STD
0.0 dB
2°
7.0°
Box 1
AX2065 STD
0.0 dB
5°
5.0°
(Frame)
0.0°
