Axiom AX2065A Скачать руководство пользователя страница 8

LIMITED WARRANTY

Proel warrants all materials, workmanship and proper opera  on of this product for a period of two years from the original date of purchase. If any defects are found 
in the materials or workmanship or if the product fails to func  on properly during the applicable warranty period, the owner should inform about these defects the 
dealer or the distributor, providing receipt or invoice of date of purchase and defect detailed descrip  on. This warranty does not extend to damage resul  ng from 
improper installa  on, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and warranty is s  ll 
valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any “direct damage” or “indirect damage” caused by product defec  veness.
• This unit package has been submi  ed to ISTA 1A integrity tests. We suggest you control the unit condi  ons immediately a  er unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspec  on.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
• Possible damages to unit should be immediately no  

fi

 ed to forwarder. Each complaint for package tampered with should be done within eight days from product 

receipt.

SAFETY INSTRUCTIONS

– To reduce the risk, close supervision is necessary when the product is used near children.
– Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.
– This product should be site away from heat sources such as radiators, lamps and any other device that generate heat.
– This product should be located so that its loca  on or posi  on does not interfere with its proper ven  la  on and hea  ng dissipa  on.
– Care should be taken so that objects and liquids do not go inside the product.
– The product should be connected to a power supply mains line only of the type described on the opera  ng instruc  ons or as marked on the product. Connect the 
apparatus to a power supply using only power cord included making always sure it is in good condi  ons.
– WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
– Do not cancel the safety feature assured by means of a polarized line plug (one blade wider than the other) or with a earth connec  on.
– Make sure that power supply mains line has a proper earth connec  on.
– Power supply cord should be unplugged from the outlet during strong thunderstorm or when le   unused for a long period of   me.

CE CONFORMITY

Proel products comply with direc  ve 2004/108/EC (EMC), as stated in EN 55103-1 and EN 55103-2 standards and with direc  ve 2006/95/CE (LVD), as stated in EN 
60065 standard.

PROEL S.p.A. (World Headquarter) - Via alla Ruenia 37/43 - 64027 Sant’Omero (Te) - ITALY 
Tel: +39 0861 81241 Fax: +39 0861 887862 www.axiomproaudio.com

Stacked installa

Ɵ

 on (KPTSW215 only)

WARNING! 

• The ground where the KPTSW215 Fly bar serving as ground 
support is placed needs to be absolutely stable and compact.
• Adjust the feet so to lie the bar perfectly horizontal. 
• Always secure ground stacked setups against movement and 
possible   pping over.
• A maximum of 4 x AX2065 cabinets with the KPTSW215 Fly bar 
serving as ground support are allowed to be set up as ground 
stack.

In the stack configuration you have to use the three optional 
BOARDACF01 feet and the 

fl

 y bar must be mounted upside down on 

the ground.
Coupling system in the front do not require any adjustment: using two 
locking pins each loudspeaker box is 

fi

 xed to the previous. The slo  ed 

bar in the back is inserted in a U-shaped frame which features a series 
of numbered holes. Sliding the slo  ed bar in the U-shaped frame of the 
next loudspeaker and inser  ng a locking pin in one of the numbered 
holes, it is possible to adjust the rela  ve splay angle between two 
adjacent loudspeakers in the array column.
The op  mal splay angles can be simulated using the EASE Focus 2 
so  ware.

KPTSW215 STACKED ARRAY

max splay angle 10°

max splay angle 10°

max splay angle 10°

max splay angle 10°

Содержание AX2065A









Отзывы: