9
PIN LOCKING AND SPLAY ANGLES SET UP
The figure below shows how to insert correctly the locking pin and how to set up the splay angle between loudspeakers.
Each of the following examples has some symbols at the connection points: these symbols indicate if a splay angle is allowed or is
prohibited for safety or acoustical reason:
press and
insert
AX16CL and AX8CL
column to column
SW212A and AXCL
sub to column
KPTAX16CL and AXCL
flybar to column *
* all accessories have similar insertion and locking
LOCKING PIN INSERTION
release and
lock
Use these holes for the column speaker splay angle:
0° as no splay.
2° as normal splay angle to obtain
a curved ver�cal array.
2° as normal splay angle to obtain
a curved ver�cal array.
+4° and -4° as splay angle
to aim a single speaker
downward or upward
(stacked only).
+4° and -4° as splay angle
to aim a single speaker
downward or upward
(stacked only).
When connec�ng insert this pin
first, also use it to rest when unused.
Use these holes for the SW212A or the accessories splay angle:
AX16CL/AX8CL
SW212A/KPT ACCESSORIES
SPLAY ANGLE SET UP
pin
pin
2°
4°
0°
2°
4°
0°
Fastening knob:
�ghten it a�er assembly the units,
release it before disassembly the units.
0° as no splay.
When connec�ng insert this pin
first, also use it to rest when unused.
Fastening knob:
�ghten it a�er assembly the units,
release it before disassembly the units.
2
0
0
4° convex angle
is prohibited
4° upward
angle is
prohibited
0° is allowed
2° concave
angle is
allowed
