C
C
C
C
C
C
C
A
A
C
B
B
B
D
6x AX1012A HOR. ARRAY
120° x 100° coverage
217 Kg total weight
list of rigging material:
A) 2x KPTAX1012H
B) 5x PLG714
C) 8x KPTAX1012
D) 1x KPTAX1012T
For horizontal arrays made of more than 6 loudspeakers, as a rule of thumb o
ne KPTAX1012H flying bar
should be used at most
every two or three
boxes
, as in the following examples. When flying arrays with more than 6 units, it is advisable to use
multiple lifting points
connected
directly to
the KPTAX1012H flying bars
, without using the KPTAX1012T suspension bars.
A
A) KPTAX1012H HORIZONTAL ARRAY FLYING BAR
C) KPTAX1012 COUPLING BAR
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
C
C
C
C
C
2-UNIT VERTICAL ARRAY
Follow the sequence below to assemble up to four AX1012A units into a vertical array. Each AX1012A has several bumpers at each side of the box
that fits in the slots of the adjacent box: this allows to arrange the boxes perfectly aligned for inserting easily the coupling bars.
The first step before lifting up the system is to assemble the fly bar to the first box. Be careful to insert properly all the bars and their locking pins,
with the shackle in the right hole as specified by the aiming software. When lifting and releasing the system, always proceed slowly and gradually
step by step, being careful to correctly assemble all the rigging hardware and to avoid endangering yourself and your hands from being crushed.
NOTE
: remember that one
PLG714
shackle is supplied with the
KPTAX1012V
vertical flying bar.
1) Remove the pins at the end of the flying bar, insert the flying bar into the rails of the first box.
