12
9.
AC TRUE RMS VOLTAGE MEASUREMENT
1.
Set the function switch to
range position.
2.
Press the
button to select the AC Volt range. The meter automatically defaults to DC
Volts.
3.
Insert the red test lead into the
input terminal and the black lead to the
terminal.
4.
Connect the other end of the test leads to the circuit under test. Take the reading on the display.
Note:
•
The meter is set to default to “Auto Range” mode.
•
Pressing the
hold button will allow the user to record the peak maximum and minimum
Reading on the AC volt range. See page 19 for further instructions for “ PEAK” Hold function.
