Operation instructions | UIM 1-00 | Universal Input Modulator
Page 10 of 20
AXING-BA_UIM-1-00.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2021-11-03
3.2. Performing a channel search
è
You must perform a channel search on the connected TV sets or search directly for the selected output
channel.
If the station is found, the AXING logo is displayed as the factory setting.
The
LCN
entered is displayed as the programme number, and the name entered under
Service
is displayed
as the station name.
3.3. Reset to factory settings
You can reset the device completely to factory settings.
è
Press the reset button for longer than 5 seconds.
The device is rebooted and completely reset to the factory settings.
This also includes the password of the web interface, the IP addresses of the interfaces and the output
channel.
Programme
number and
station name
