Operation Instructions
SZU 21-00
Chapter
3:
Operation
10
© AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
14.04.11
3.
Please move now the Satellite dish antenna slowly until you clearly hear the buzzer
noise. The SAT Navi has logged-in and reckognized the wanted Satellite. The
following other informations are displayed now too:
P:
Signal Strength (in dBµV)
BER:
Bit Error Rate
Q:
Signal Quality (Bar Graph)
Fig. 9: Signal
With this Information and the acoustic signal, you can fine-tune the antenna to the
optimal position.
The frequency of the acoustic signal is linked to the signal quality. So you can search
the satellite and fine-tune the position also without seeing the display of the Sat
Navigator.
Î
To exit the Satellite Navigator function, just press
OK
.
3.1.1
Short Circuit Protection
If there is a short circuit on the LNB input, the LNB power will be cut off and there will be
the message “Short c. detected” in the display.
After you have removed the cause for the short circuit, it appears the message “Short c.
restored” and the LNB Power is switched on again.
3.2
Light menu
In the Light Menu, you can switch the background light of the LCD on or off.
