OPERATING ADJUSTMENT VIA LCD & BUTTONS
For ‘Menu & Submenu’ settings, press the OK button to access the adjustment mode.
In this mode ‘
＊’
will be displayed in the upper right corner. Use the UP or DOWN buttons to
select parameter values, then press OK button to confirm the setting.
RF OUTPUT
·
Setup RF Output
RF Output
Setup RF Output
Following the main Submenu flow charts enter the ’Setup RF Output’
mode.
Country:
Europe
Press the OK button to enter the next page for country selection.
Country:
＊
Europe
Press the OK button to access the adjustment mode. The LCD display
will show an asterisk ‘
＊’
in the upper right corner. You can now
press the UP or Down buttons to select the country you require.
Press OK button to save. (Europe,Taiwan, OC NTSC, OC PAL,
Australia, New Zealand.)
Use the same steps above to adjust the following items.
Area:
France
France, Italy, Nordic, UK, Belgium, Others
Frequency:
E11(219.5MHz)
E05(177.5MHz)~E69(858MHz)
※
Output Level:
80dBuV
75~90dBuV
Symbol rate:
6.875000
Up to 6.910M Symbol/s
Constellation:
QAM64
QAM16, QAM32,QAM64, QAM128,QAM256
Are you sure?
y
When all the item in ‘Setup RF Output’ are done, there will be a
confirmation on the display. Press UP or Down button to select YES
or NO. Select ‘y’ for YES, all the settings above will be stored in
memory. Select ‘n’ for NO to cancel.
·
Retrieve Status
Following the main Submenu flow charts enter the ‘Retrieve Status’ mode, you can check the
parameters of your previous setting in ‘Setup RF Output’.
RF-Tuote Oy, Joensuunkatu 13, 24100 Salo, tel. +358-2736 6360, fax. +358-2-736 6360,
