axing ISW 9-43, Руководство по эксплуатации

Страница: 20 / 24

Operation instructions | ISW 9-43 | Set-Top Box
8 2019-04-30 | Technical improvements, changes in design, printing- and other errors expected.
4.2.1. Buttons on the remote control
ISW 9-43 includes a remote control with a special block of five programmable buttons (marked with blue print
colour), which you may want to choose for controlling other devices (TV set, amplifier).
4.2.2. Programming of the Remote Control Unit
To program the buttons do the following:

Press the «On/Off» and «A/V» buttons at the same time and hold it for 2 seconds. When the green light of
the «On/Off» button will stop blinking and will light steadily, it means the RC is ready to learn.

Press the button you want to «teach» — the green light will start blinking.

Place the infrared lamps of two RCs opposite each other and press the button on the RC of the other device,
the function of which you wish to copy on device RC. Hold for 2 seconds.
After the green light two quick blinks you may continue programming other buttons.

Repeat the procedure described above for all buttons you want to program for controlling external devices.

Press the the «On/Off» and «A/V» buttons to save the programmed data; the green light should fade off.
4.2.3. Reset the Programming

Press SETUP and OK buttons at same time and hold for 2 seconds red LED will flash 5 times. Reset is done.
4.3. Maintenance
The product should not be disassembled. The tries of the disassembling of the product may be dangerous for
your life and for serviceability of the product.
The self-supporting disassembling invalidates you the product guarantee.
The maintenance should be affected by qualified specialists in service centers only.
The product possesses protective sealing.