Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35
8
2020-03-19 | Technical improvements, changes in design, printing- and other errors expected.
2
nd
Step – change the control port IP address in the required IP address space.
Enter via browser the control port web interface (192.168.0.157) and configure it also in to required address
space.
For example: 192.168.178.100 it must be in the same IP-adress space.
Note:
After this the connection to the controller is interrupted.
3
rd
Step – assign the encoder IP addresses in the control port web interface
Configure your computer to the same IP address space as the encoders and the controller.
For example: 192.168.178.50
Enter via browser the web interface of the controller (192.168.178.100).
Choose MAINTENANCE>Network>Encoder IP addresses
Type in the changed encoder IP addresses.
For example:
– Encoder 1: 192.168.178.110
– Encoder 2: 192.168.178.111
– Encoder 3: 192.168.178.112
– Encoder 4: 192.168.178.113
– Encoder 5: 192.168.178.114
– Encoder 6: 192.168.178.115
– Encoder 7: 192.168.178.116
– Encoder 8: 192.168.178.117
Click
Apply
.
