axing EOC 20-02 Скачать руководство пользователя страница 3

Manufacturer

AXING AG 

Gewerbehaus Moskau

 8262 Ramsen

EEA contact address

Bechler GmbH

Am Rebberg 44

 78239 Rielasingen

State of the art 2020-09-06

Technical improvements, changes in design, printing- and other errors expected.

EU Declaration of Conformity:

Hereby AXING AG declares that the device is in compliance with Directive 

2014/53/EU. The full text of the EU declaration of conformity is available at the 

following internet address: 

https://axing.com/en/downloads/ce/

.

WEEE Nr. DE26869279 | Electrical and electronic components must not be 

disposed of as residual waste, it must be disposed of separately.

Safety advices:

 

Do NOT use the device near water or in rooms with high humidity such 
as humid cellars or near swimming pools.

 

Do NOT use the device outdoors. All connections must be located inside 
a building. 

 

Keep the device away from moisture, dust or corrosive liquids.

 

Do NOT install the device, use it or perform maintenance during a 
thunderstorm. There is a risk of electric shock during thunderstorm.

 

Connect ONLY appropriate accessories to the device.

 

Use ONLY the supplied AC adapter.

 

Make sure that all cables are connected to the correct port.

 

Carefully lay the Ethernet, antenna and electric cables to ensure that 
nobody can step on or stumble over them.

 

Do NOT cover the ventilation slots of the device since insufficient air 
supply may result in damage to the device.

 

Do NOT place any objects on the device. 

Do not place objects filled with 

liquids such as vases on the device.

 

Position the device in a place where NOBODY can step on it.

 

In case of damage, interrupt the power supply IMMEDIATELY.

 

Do NOT try to repair the device. This equipment should ONLY be serviced 
or repaired by qualified service personnel. Contact your distributor for 
more information.

 

Do NOT open the device.

 

Prior dismounting, disconnect the electric, Ethernet and antenna cable 
from the device.

EoC 20-02

premium

-line

Ethernet over Coax  
Endpoint (EP)

Quick start guide

Technical data:

Type

EOC02002

Frequency range

5…1218 MHz

Connectors (TV | EoC)

2 × F-female

Frequency range transmission

5…65 MHz

Frequency range TV bypass

85…1218 MHz

Maximum allowed attenuation in 
coaxial network

80 dB

EoC

Standard

ITU-T G.9960/G.9961 G.hn over Coax

Data rate (gross)

720 Mbps 

Max. number of devices in EoC 
network

1 × EoC 20-01 | ≤ 31 EoC 20-02

Interfaces

Ethernet connectors (LAN)

2 × RJ 45

Ethernet standards

IEEE 802.3u 100BaseT Fast Ethernet 

IEEE 802.3ab 1000BaseT Gigabit Ethernet

WiFi standard

IEEE 802.11b/g/n

WiFi encryption

WPA/WPA2

General

Operation voltage

12 VDC

Power consumption

4 W

Operating temperature range 
(acc. to EN 60065)

0°C…40°C

Dimensions (W × H × D) appr.

130 x 95 x 32 mm

Weight

0,168 kg

External accessories

Switching power supply

100…240 V~/50/60Hz | 12 V=/0,5 A

Содержание EOC 20-02

Страница 1: ...stolpern kann Die Lüftungsschlitze des Geräts NICHT abdecken da eine ungenügende Luftzufuhr zur Beschädigung des Geräts führen kann KEINE Gegenstände auf das Gerät legen KEINE mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf das Gerät stellen Das Gerät so platzieren dass NIEMAND auf das Gerät treten kann Bei Beschädigung Stromzufuhr zum Gerät SOFORT unterbrechen KEINE Reparaturversuche untern...

Страница 2: ...ware Verbindungen Verwenden Sie einen geeigneten Aufstellungsort für den EoC 20 02 in der Nähe des PCs oder Ethernet Geräts mit dem es verbunden werden soll Das Gerät muss von Wärmequellen ferngehalten werden Vergewissern Sie sich dass das Koaxialkabelnetz richtig geerdet ist Verwenden Sie ein Koaxialkabel um den G hn Anschluss mit der Antennensteckdose zu verbinden Verwenden Sie ggf ein weiteres ...

Страница 3: ...NOT cover the ventilation slots of the device since insufficient air supply may result in damage to the device Do NOT place any objects on the device Do not place objects filled with liquids such as vases on the device Position the device in a place where NOBODY can step on it In case of damage interrupt the power supply IMMEDIATELY Do NOT try to repair the device This equipment should ONLY be ser...

Страница 4: ...onal Connect the LAN1 LAN2 port to your Ethernet equipped device Connect the power adapter to the DC12V port and connect it to a wall outlet Ports on the rear panel Port Name Button Type Functions A G hn F Connect to the antenna wall outlet B TV F Connect to TV C LAN1 LAN2 RJ 45 Connect to PC or STB or other Ethernet devics D R Reset Button E DC12V DC Connect to the power adapter plug WiFi access ...

Отзывы: