Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EEA contact address
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
State of the art 2018-10-08
Technical improvements, changes in design, printing- and other errors expected.
Safety advices:
Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
To prevent damage to your equipment and to avoid possible peripheral
damages, the devices foreseen for wall mounting may only be installed
on a flat surface.
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. The mains cable as well as feeder lines may not be
damaged or clamped by objects of any kind.
Choose the location of installation or mounting so that under no
circumstances liquids or objects can get into the equipment (e.g.
condensation, water coming from leaking roofs or flowing water, etc.).
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Absolutely
avoid that cables come near any source of heat (e.g. radioators, other
electrical devices, chimney, etc.).
SPU 21-01
basic
-line
DiSEqC switch
Operation instructions
Technical data:
Artik
el
SPU 21-01
Ty
p
2 in 1
Schaltkriterien
Band (22kHz) | P
osition (T
one Burst) | Option
Unterstützte DiSEqC-Level des SA
T-Empfängers
1.0 | 2.0
Frequenzbereich (Upstream |
TERR | SA
T)
5…65 MHz | 85…862 MHz | 950…2200 MHz
Anzahl der Eingänge
2
Teilnehmeranschlüsse
1
Durchgangsdämpfung SA
T
≤
2 dB
Entk
opplung zwischen den LNBs
≥ 25 dB
Umgebungstemperaturbereich (gemäß EN 60065)
-20…+50°C
Maße (B × H ×
T) ca.
110 × 80 × 35 mm
Herewith AXING AG declares that the marked products comply with the valid
guidelines. You can call up the complete EU declaration of conformity for
download by entering the article in the search field at www.axing.com.
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.
