AXIL MD0288E, Руководство пользователя

Страница: 19 / 123

till you find one code which work good enough.
Remark: In the process of setup, if you want to quit from setup mode, please press device key.
(If no key pressed in 10 seconds, the remote control will leave the set up mode
automatically.)
B. Set Up by Manual Search:
After you have set up by device brand code several times, the remote control still doesn't
work (i.e. The device still can not be controlled by this remote control), or you can not find
the correct code in the Device Brand Code List, you can use " Manual Search " to find out the
reactive Code:
a. Power on the device that you want to control. If it is a VCR, it must be inserted with a tape.
b. Press and hold the [SET] keys. Then press the device key in remote control, such as [TV] ,
[VCR] etc
c. The LED will be on at moment. Then release the pressed keys.
d. Point the remote control to the device, press the [POWER] key. If it's VCR/DVD, you can
press [POWER] key, the remote control enters into" Manual Search" mode and the LED
keeps flashing.
e. See if device reacts or not. If it works, turn to step f; If not, repeat step d every 1 second.
f. Test other keys. If keys work well enough, press the device key to quit from the search
mode. If most keys don't work well enough, repeat step d-­‐f to find the best code.
Remarks:
a. Whenever you want to leave or change search mode, press the device key to quit, and
the LED will turn off.
b. In the Manual Search Mode, besides the [POWER] key, all other keys' function can be
checked normally. That is to say you can test other keys without leaving Manual Search
mode. It will leave Manual Search mode automatically if no key pressed in 30 seconds.
c. You may use the SET key to change the search direction from forward to backward or
from backward to forward.
C . Set up by Auto Search
：