Axicon 12700 Start-Up Guide
11
HARDWARE INSTALLATION
1. Connect the metal connector on the end of the verifier fly-lead
to the metal connector on the power supply lead.
2. Plug the mains lead into the Power Supply Module.
3. Connect the mains lead to the mains power supply.
4.
Connect the USB lead from the verifier to a USB2 port on the
computer.
5.
The USB2 drivers that need to be installed for the hardware
to work correctly are all located on the CD-ROM. The
installation of the driver will be done automatically.
6.
SECTION 4. – RUNNING THE SOFTWARE – FIRST TIME
4.1 When running the software
for the first time, this dialogue
boxs will pop up, please click on
the OK button.
Select as appropriate and then
click OK.
4.3 If in any doubt select the
“Non UID” and “Don’t print
report after each scan” options.
(You can always change these
later if required. Click on the
“OK” button.