13
Disconnecting
1. Click the Connect/Disconnect button after finishing your job. The connection is
discontinued and the active Connect/Disconnect button is changed to the
disabled status.
2. To exit the program after finishing the job, click the “
X
” button at top right of the
program window.
3. Remove the Card from your PC or disconnect the cable from PC and Card.
2. Device Setting
Click the Setting button on the main screen of the program to open the following
dialog, where you can specify values for many items needed to set up your
modem. The following screen will appear.
2.1. General
Reload
button allows you to reset the Card setting to default factory setting.
PIN
setting sub-menu allows you to enable or disable the feature. Check with
your service provider before you attempt to change the PIN value or enable
this feature. Click the
Apply
button to confirm your new selection.
