Axesstel CDMA PX330N, Руководство пользователя, Страница: 8 / 27

5
CDMA FWP
PX3 3 0N
3.2.3 Display Icon
The following icon may appear on the display of the phone:
No. Icon Description
1 Current signal strength. The more bars there are, the stronger the signal is.
2 No signal.
3
Battery capacity indicator. The more bars there are, the more capacity the
battery has.
4 Supplied by charger
5 Alarm on
6 Mute
8 No UIM card
9 Unread message
10 Roaming
Figure 3 Display Icon
4 Basic Operations
4.1 Installing UIM card
1. Remove UIM bracket cover.
2. Insert proper UIM card.
3. Close the cover.
4.2 Power On/Off
Connect DC power supply to the “DC IN” port or insert the battery to the battery chamber. Switch the
“Power” switch (on the rear of the Phone) to ON, then press the Power On/Off Key on the panel for 3
seconds to power on the phone---if the DC power is in and the phone will power automatically, your
phone should go to standby screen and is ready to use.
You can turn the phone off directly by switching the “Power ON/OFF” switch (on the rear of the phone)
to OFF position. If the phone will not be used for long time, please turn this switch to OFF. Or you can
press the Power On/Off Key for 3 seconds to power off the phone.