1xEV-DO Wireless Broadband Modem AXW-D800/D1900
Axesstel
9
Connection using USB port
1. Power off your PC.
2. Connect the included USB Cable to USB port on your PC.
3. Connect other end of USB Cable to USB port on Wireless Modem.
4. Connect the included Power Adapter to Power connector of Wireless
Modem. Connect the other end of Power Adapter to an electrical outlet.
5. Power on Wireless Modem.
6. Power on your PC. During the boot up process, your PC will recognize
Wireless Modem and ask to install Wireless Modem drivers. You need to
install Wireless Modem USB driver that was supplied with Wireless
Modem. Refer to “USB Driver Installation” for more information.
Configuring Your Wireless Modem
Wireless Modem provides an embedded Web-based Management Utility.
Configure your Wireless Modem by using your Web Browser.
Log In
•
Open Web browser and enter IP address of Wireless Modem. Default IP
address of Wireless Modem is 192.168.0.1
•
When prompt for User name and password, enter admin/admin.
•
Click on appropriate tab to access System, Network, Security, or Status
settings.
