6
7
BLUETOOTH device automatically.
RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE
If the device is already paired with the SBBT1203, but became unconnected even with both
Bluetooth devices turned on. You can re-connect them by following steps:
1. Press and hold the PAIR button on the unit or on the remote to re-link the audio source
device. The Bluetooth indicator will blink for about 1.5 minutes for connecting.
2. Select SBBT1203 on the audio source device for connecting. Bluetooth indicator will turn
to solid blue if the SBBT1203 and the device have been re-connected successfully.
EQ EFFECTS
During playback, press EQ button on the remote repeatedly to cycle through the EQ options;
when your desired EQ effect shows on the screen, release the button.
FM RADIO
TUNING THE FM RADIO
1. Power on the unit, switch to FM (RADIO) mode by pressing MODE button repeatedly.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio station. Press
and hold the TUNING/SKIP/SEARCH buttons on the remote to auto search radio station
forward or backward respectively (When an available station will be found, the unit will
broadcast it immediately and the searching will be stopped). During auto searching, press
the TUNING/SKIP/SEARCH buttons on the remote to stop the searching.
3. At radio mode, it is possible to access the frequency via numeric buttons on the remote
control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz.
STORING YOUR FAVORITE RADIO STATION
1. During playback, press the MEM button on the remote for storing the current station until
a memory cell number flashes on the screen.
2. Use the CH+ or CH- buttons on the remote to select the corresponding memory cell for
storing the station.
3. Confirm your selection by pressing the MEM button on the remote.
4. During radio playback, press the CH+ or CH- buttons on the remote repeatedly to recall
the stored stations.
MUTE THE UNIT
During playback, press the MUTE button on the remote to switch off the audio. Press the
button again to resume the audio.
VOLUME LEVEL/TREBLE/BASS ADJUSTMENT
Press the /- buttons or /- buttons or BASS +/- buttons on the remote to
adjust the volume output level or treble effect or bass effect.
PROFESSIONAL AUDIO MODES
During playback, press the VOICE, MUSIC or MOVIE buttons on the remote to switch
among voice, music and movie audio modes for getting high sound quality. The audio
modes can reveal the characters and details of the sound of the voice, music and movie and
make you liked being there.
CONNECTING WITH OTHER DEVICES
AUDIO IN
1. Connect the Aux in jacks on the unit to audio source, for example, DVD player with an
RCA cable.
2. Power on the unit and the audio device.
3. Press the MODE button repeatedly to switch to AUX mode.
4. Use the native controls on the connected audio device to begin playing music through the
connected unit.
LINE IN
Follow steps to connect the unit to another audio device:
1. Connect the device into the unit’s LINE IN jack with the LINE OUT cable.
2. Press STANDBY button to turn the unit on.
3. Press MODE button repeatedly to switch the unit to Line mode.
4. Power on the device and begin play.
OPTICAL INPUT
1. Connect a Digital Optical Audio Cable to the optical output on the audio source and to
OPTICAL IN on the unit.
2. Power on the unit and the audio source.
3. Press MODE button repeatedly to switch to OPT in Mode.
4. Audio from the connected audio source will now be played through the unit.
