Axent AXENT.ONE C PLUS, Руководство пользователя

Страница: 7 / 38

6
SAFETY
GROUNDING INSTRUCTIONS
This product must be grounded when plugged in. The power cord on
this product has a grounding plug and must be plugged into an outlet
with a properly grounded grounding plug.
DANGER!
Improper use of grounding plug can result in a risk of electric
shock
For safety, the intelligent toilet should be plugged into a standard 3
prong GFCI outlet.
Grounding pin
Grounded outlet
Grounded outlet box
Wiring Diagram (NOT FOR INSPECTOR’S USE)
If repair or replacement of the power cord or plug is necessary, do not
connect the grounding wire to either flat blade terminal.
This product is not to be used with extension cords.
This product is factory equipped with a specific electric cord and plug
to permit proper connection. No adapters should be used with this
product. Do not modify the power cord on the toilet. If the power cord
will not fit the outlet, have the proper outlet installed by a qualified elec-
trician. If the product must be reconnected for use on a different type of
electric circuit, the reconnection should be made by qualified service
personnel.
Please unplug unit immediate and contact for service if cord becomes
damaged. Do not use a bidet seat with a damaged cord.
NOTE!
Actual installation may differ slightly from the diagram.
FCC INSTRUCTIONS
Please note that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.