Note :
From stock, the enclosure is not machined to provide access to this con-
nector. As it's rarely used, we though better to keep a good protection from
dust.
Important:
inputs and output are not opto-isolated. Furthermore, outputs can
only provide a current of 10 mA each (this is still more than a LPT port can do),
with a total of 50 mA maximum for the whole set of outputs.
Consequently, a bad connection or an overload may cause
damages in the
PulseBox NxtG
module, or even in the host
computer. So it is very important to make sure that all devices that are driven
by the module are carefully isolated and do not require too much current.
--
7
--
