IP telephony and 4G subscriptions
IP-telephony and 4G subscriptions can be made at
https://registrering.axema.se/
Installation and configuration
1. The C10 is supplied with a cable and two connectors, one should be
connected below the module and the other in the TCP/IP2 connector. The
C10 can be mounted on any door controller in the system with intercom.
2. The C11 is mounted without a cable in any door controller where intercom is
desired.
3. Log in as installer in the VAKA software
4. VAKA will automaticaly detect the new hardware and a dialog (
New
hardware detected) will appear.
5. Click on the dialog and follow the instructions to install the module.
6. New hardware can also be installed under
Settings - Installation - Installation
of Reader / Module.
3 (9)
Manual (En) VAKA-CALL Master 4G