If an external antenna is used
The external cable can be run as in the picture.
Installation
1. Remove power from the door controller
2. Connect the antenna to the module, if one is used.
3. Connect the module to one of the two connectors in the controller and apply
power to the controller.
4. VAKA will automaticaly detect the new hardware and a dialog (
New
hardware detected) will appear.
5. Click on the dialog and follow the instructions to install the module.
Programming
1. Navigate to
Doors - Radio Keys on the door where the module was installed.
2. Under
General, the
Time schedule
during which radio key are active
should be selected.
5 (6)
Manual C18
