11
Control panel function
1.
MODE button
2.
ANION button
3.
WIND button
4.
COOL button
5.
TIMER button for air flow or cooling
6.
Power button for run or POWER
7.
Speed button
COOLING
❖
Open or take down the detachable water panel on left side of the board.
❖
Add clean water into the water tank, and observe water level through the transparent window
to control water volumn, total water should be between "Min" and "Max ».
❖
For extra cooling operation, place ice into the large compartment and close the water panel.
❖
Press 'POWER ' button
❖
Press 'COOL' button for icy breeze.
AIR FLOW
❖
Press 'SPEED' button on control panel to select fan speed as below.
HI : STRONG
MI : MEDIUM
LO : SLOW
❖
Press 'WIND' button on control panel,air flow will automatically oscillate from left to right
❖
To regulate air flow up or down-adjust front louvres manually
TIMER
❖
There are four positions with indicator lights
0.5H : HALF AN HOUR
1H :ONE HOUR
2H : TWO HOURS
4H : FOUR HOURS
❖
Press 'TIMER’ button to select any of the above settings.
❖
Your unit will automatically switch off when selected.
❖
If the timer button is not used, your unit will continue operating until switched off.
MODE
❖
Press ‘MODE’ button to select Normal, Natural, Sleep mode.
ANION
❖
Press ‘ANION ’ button, then the Anion function is turn on.
Содержание RAF
Страница 10: ...10 Structure...
