RS-USBX user manual - 2009/03/16
SP09002
Page 4 of 12
2 QUICK GUIDE TO INSTALLATION
2.1 INTRODUCTION
What you need to install the RS-USBX module is:
•
PC
•
the setup CD
•
USB cable of type A/B
•
the RS-USBX device
2.2 INSTALLATION
Follow the steps below to install the RS-USBX tools:
•
Execute
RS-USBXTools.exe
.
•
The setup program has few options. The most important are:
- install drivers (always recommended, it has no effect on up-to-date PCs);
- install VB runtime (needed to run software tools, recommended).
•
The following message may appear on PCs running Windows XP, when the setup program begins to
install the USB drivers:
Ignore this message and continue with installation.
•
Connect RS-USBX to your PC through the USB cable.