Axel AX3000 80WMS, Руководство пользователя

Страница: 77 / 136

Using the AX3000
AX3000 Model 80WMS - User's Manual
69
Table 2 - Axel Notification Icons ('Classical' taskbar)
Turning off - See Chapter 4.5
Getting terminal information (Firmware/Hardware)
The network status In event of problem:
Disconnecting the MultiPoint session. See Chapter 3.2.2.
USB drive status. Only displayed if a USB drive is attached
- : read in progress
- : write in progress
4.3
– MULTIPOINT SESSION
4.3.1 - Creating a Session
Click the MultiPoint icon or the taskbar to open the session.
First, the terminal checks if the server is actually a MultiPoint server. This takes
few seconds. In this probe fails, the session is aborted and the following error
message is displayed:
Note : This error is displayed because the server didn't reply to UDP requests
(multicast on port 3702) in less than 5 seconds. This indicates the server is not
installed on the same subnet as the thin client or requests are blocked by a
firewall.