Axcera 5720 Series, Руководство пользователя

Страница: 17 / 65

Rear Panel
The rear panel of the 5720 features remote control inputs and outputs, visual and aural IF
inputs and outputs, visual and aural analog inputs, 10MHz reference input, and access to
SCADA communications if that is a selected option. AC connections as well as a cooling fan and
circuit breaker are also located on the back of the unit as pictured below.
13
Connection Label Description Connector Type / Impedance Frequency
J1 AC AC input to the unit IEC320 50 or 60 Hz
J2 Video I/P Video Signal Input BNC 75 ohms baseband
J3 Comp Audio I/P Composite audio input BNC 75 ohms 50Hz-100KHz
J4 Visual IF O/P Visual IF signal output BNC 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J5 Visual IF I/P Visual IF signal input BNC 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J6 Aural IF O/P Aural IF signal output BNC 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J7 Aural IF I/P Aural IF signal input BNC 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J8 RF O/P RF signal output N / 50 ohms 2.1-2.7 GHz
J9 Combined IF O/P Combined IF output BNC 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J10 IF CW I/P IF contionious wave input BNC 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J11 Baseband Baseband audio input 3 position terminal block baseband
600 ohms
J12 Control Control Signals D connector 37 position female N/A
J13 Remote Remote signals D connector 25 position male N/A
J14 IF I/P IF input signal BNC / 75 ohms 38.9-45.75 MHz analog
36 or 44 MHz digital
J15 SCADA Comm SCADA port RJ-45 N/A
J16 SCADA Comm SCADA port RJ-45 N/A
J17 EXT 10MHz Ref I/P 10 MHz reference input BNC / 50 ohms 10 MHz
CB1 AC Circuit breaker N/A N/A