Axair PH7, Руководство по эксплуатации

Страница: 4 / 14

17
3 Product overview
3.1 Design
3.2 Functional description
1 Hood
2 Fan speed key
3 Fan speed LEDs
4 On/Off key
5 Fan housing
6 Impeller
7 Activated charcoal vaporizer mat
1
5
7
8
10
9
13
14
11
12
PH7 Plus
4
PH7
PH7
PH7 Plus
3 2
6
1
2
4
5
6
7
3
A
The Axair PH7 is an all-season unit for air humidification
and air purification.
Via the level regulating valve (2) the water flows from the
water tank (1) to the base tub (3). The impeller (4) sucks up
the water from the base tub and projects fine drops towards
the activated charcoal vaporizer mat (5).
The fan (7) located in the upper part of the fan housing takes
in ambient air. The filter (6) purifies the air which is then
moistened by the activated charcoal vaporizer mat. Finally,
the purified and moistened air is exhausted to the room, via
the slots in the upper part of the housing.
Note: If the Axair PH7 is operated without water it works as
air purifier only and no humidification takes place.
3.3 Unpacking, checking the delivery and
removing the transport lock
• Unpack the Axair PH7.
Important! The original packaging of the Axair PH7
was designed for optimum safety during transportation.
Please preserve the original packing material as well as
the transport lock (see below) in case you once have to
return the unit for some reason.
• Lift up the hood. Pull out the mains cable from the cable
duct in the air intake screen and carefully lift up the fan
housing. Then, remove the transport lock “A”.
8 Triplex filter (PH7)
9 Hepa filter (PH7 Plus)
10 Water tank
11 Level regulating valve
12 Tank base
13 Air intake screen
14 Base tub