I. OPERATION
Place Scale on a horizontal flat surface.
1. Press [ ] key.
2. Wait until "0.0” or is displayed.
3. Place the object(s) on the weighing platform.
4. By tapping the [
M
] key, you can switch between
weighing units.
5. The removable lid can also be used as a weighing
tray.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place a tray or container on the scale platform.
3. Press [
T
] and wait until "0.0" or is displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
III. CALIBRATION
Calibration is NOT required before first use. Only
calibrate if scale is not weighing properly.
**Make sure you use the correct calibration weight for
your scale or the calibration will not be accurate**
V2-500: 500g calibration weight
1. Turn on scale as described above.
2. Press and hold the [
M
] key, until the LCD displays
"CAL".
3. Press the [
M
] key once more. The dispay will flash
"CAL" followed by "500.0".
4. At this point, place a 500g calibration weight (not
